오늘하루 그만보기
| 상품명 | KTI-H3 series |
|---|---|
| 판매가 | 가격문의 |
| 수량 |   |
| SNS 상품홍보 |   |
|---|
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
| 상품명 | 상품수 | 가격 |
|---|
Notice
- 주문하시기전에 재고 여부 및 배송일정에 대한 상담을 먼저 진행해 주시기 바랍니다. 02-6264-5745
- Process QuestionNaire 를 작성해 주시면 검토 후 제품을 추천해 드리겠습니다. [양식다운로드]
- 독일 IKA 재고상품을 특별가격으로 구입하실 수 있습니다. [기획전 바로가기]
제품상세정보
제품명 : KTI-H3 series, Inline high shear emulsifying machines (Horizontal type)
제품특징
Three sets of stators and rotors are equipped in working cavity. Driving shaft in working cavity is an arm, electrical motor and the shaft in bearing cabinet can be connected by spring coupling to improve the operation quality of driving shaft. Seal form can be selected in different conditions. It is fit for middlelarge scale online continuous production or circulated treatment production process.
• Medium sucked in by strong axial suction force.
• Single phase liquid, multi-phase liquid or suspended particles are pumped in though single-stage, double-stage or three-stage rotor and stators.
• No matter what medium property is, pump will evenly shear all the liquid with high intensity and controllable force.
• Shearing rate is constant, different size depends on gear of rotor and stator and speed of rotor.
제품사양
| Model | Power(kw) | Rotation speed(r/min) | capacity (m3/h) |
|---|---|---|---|
| KTI 60-H3 | 4 | 2900 | 0-1.5 |
| KTI 100-H3 | 5.5 | 2900 | 0-3 |
| KTI 120-H3 | 7.5 | 2900 | 0-4 |
| KTI 140-H3 | 11 | 2900 | 0-5 |
| KTI 165-H3 | 18.5 | 2900 | 0-8 |
| KTI 180-H3 | 22 | 2900 | 0-12 |
| KTI 200-H3 | 45 | 2900 | 0-25 |
| KTI 210-H3 | 55 | 1470 | 0-35 |
| KTI 230-H3 | 75 | 1470 | 0-50 |
| KTI 245-H3 | 90 | 1470 | 0-75 |
| KTI 260-H3 | 110 | 1470 | 0-90 |
| KTI 275-H3 | 132 | 1470 | 0-110 |
Note : Flow range on the meter refers to the datum measured when the medium is "water" ,the exit pressure ≤0.2 Mpa of the model listed in the table. In conditions of high temperature, high pressure, flammability, explosion and erosion, relevant parameters must be provided clearly for selecting customization precisely. For poor liquid medium, a pump which has a matching flow is suggested to feed at the entrance, input pressure ≤0.2 Mpa. If the datum in the table is modified, no further notification will be given, and the right parameters as per the provided sample.
